- What is code for installing a toilet?
- Are there different size wax rings for toilets?
- Do you need plumber to install toilet?
- Are all toilets interchangeable?
- Are all toilet flanges the same size?
- What is the hole in the toilet called?
- How much does it cost to install a new toilet?
- Can I replace a toilet myself?
- Can an elongated toilet replace a round toilet?
- Which toilet is better round or elongated?
- How do I know if a new toilet will fit?
- What is the average cost for a plumber to install a toilet?
- How do I know what size toilet I need?
- Are all toilets the same height?
- What is the difference between an elongated toilet and a round toilet?
What is code for installing a toilet?
Bathroom building code typically says that toilets need at least 21 inches of clearance in front of the toilet.
While it is not required, opting for 30 inches of room provides a more comfortable space.
Side-to-side clearance: a minimum of 15 inches from the center-line of the toilet to the nearest obstruction..
Are there different size wax rings for toilets?
Thickness – Check the toilet flange. Lucky for you, there are only two thickness options to choose from: regular and double-thick. … If the flange is level with your floor, a regular-thickness wax ring will be fine. You’ll only use a double-thickness wax ring if the flange is located under the floor.
Do you need plumber to install toilet?
The short answer is YES YOU CAN. Replacing a toilet is an easy job for the average homeowner. It requires minimal basic tools and should only take up less than an hour of your time.
Are all toilets interchangeable?
Most toilets are interchangeable with one another, and can be easily replaced as a DIY project or as part of a bathroom remodeling project or as an independent home improvement project. … Toilets also come in a range of seat heights and there are two basic bowl configurations, standard and elongated.
Are all toilet flanges the same size?
One common standard toilet flange size is 4×3, and this is the measurement you will find beside most flanges available at your hardware or plumbing stores. … The top side of the flange, which connects to the toilet, is 4 inches in diameter, while the bottom diameter of the pipe is 3 inches.
What is the hole in the toilet called?
Bowl: The lower area of a toilet where the seat is mounted. Rim holes: The holes which allow water to refill the bowl from around the edge. Jet hole: Some bowls also include an opening near the bottom that increases the flushing pressure. Outlet: The opening at the bottom of the bowl that leads to the trap.
How much does it cost to install a new toilet?
On average, a standard toilet installation costs between $122 and $228 with most homeowners spending around $150 to $180. This does not include the price of the toilet which averages $99 to $199 for a total toilet replacement cost of $221 to $427. Get free estimates from plumbers near you.
Can I replace a toilet myself?
Replacing or installing a new toilet isn’t as hard as it may sound. All you really need are a few hours of time and the right tools for the job. So, gather up your new toilet, replacement wax ring, rubber gloves, hacksaw, a putty knife, adjustable wrenches, plunger, a bucket and some old rags.
Can an elongated toilet replace a round toilet?
An elongated toilet seat will technically fit on a round toilet, but the fit and comfort may be compromised. An elongated toilet seat will likely overhang a round toilet which may be fine unless the rim of the toilet is visible within the opening of the toilet seat.
Which toilet is better round or elongated?
Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31″ from the wall, while round fixtures max out at 28″. Because round bowls are less expensive than elongated bowls, they save a few dollars, too.
How do I know if a new toilet will fit?
Measure for a New Toilet Also measure to any nearby water supply lines on the floor. Some toilets have a wider base which might not fit next to a supply line on the floor. It’s a good idea to measure from the bowl to a sidewall just to be sure that the toilet will fit in your space.
What is the average cost for a plumber to install a toilet?
$125 to $260Toilet installation ranges from $125 to $260, not including materials. The toilet is typically supplied by the homeowner. Dear Susan: In checking with highly rated plumbers, our researchers find that the average price to install a traditional toilet ranges from $125 to $260.
How do I know what size toilet I need?
Make sure the toilet dimensions will fit your space. Start by measuring the rough-in size. This is the distance between the wall behind the toilet and the center of the drainpipe or the bolts that hold the toilet to the floor. It’s best to perform this measurement before you remove the old toilet.
Are all toilets the same height?
Toilet height is measured from the floor to the top of the seat. Heights vary enough to be noticeable. Most often, they fall somewhere between 15” and 19”, with standard toilets coming in under 17”. However, chair height toilets, what Kohler refers to as Comfort Height® toilets, measure 17” or more.
What is the difference between an elongated toilet and a round toilet?
Most toilet manufacturers make many of their most popular styles of toilet in both a round and elongated front bowl. … A round-front toilet bowl is closer to a true circle. It, therefore, extends less into the room. An elongated toilet bowl is oval, extending several inches more into the front of the room.